Cedar Homes of Washington https://www.chwi.com Luxury Lodge Home Living Tue, 04 Jul 2023 13:44:46 +0000 en-US hourly 1 https://wordpress.org/?v=6.2.2 https://www.chwi.com/wp-content/uploads/2023/04/favicon2-150x150.jpg Cedar Homes of Washington https://www.chwi.com 32 32 Classic Timber Wall System https://www.chwi.com/classic-timber-wall-system/ https://www.chwi.com/classic-timber-wall-system/#respond Tue, 04 Jul 2023 13:20:16 +0000 https://wiredtogether.ca/chwi/?p=13890

Cedars Homes of Washington has manufactured a Danish style (Classic) interlocking notch that allows precision milled wall timbers to connect at 90 degrees and create a locked in place joint. Corner Timber “stubs” are visible from the exterior of the building.

WALL CONFIGURATIONS

Wall Timbers are Solid Air-Dried Western Red Cedar, Select Knot (SK) precision milled on four sides to create a tongue & groove connection. The wall timbers are precision end cut to exact length, notched to create lock joints at corners, labeled, wrapped and ready for on site assembly.

Single Timber Wall System….

Wall timbers are laminated 4×6 (3 1/2″) to meet Energy Code requirements in the United States as well as International construction. Wall timbers are appearance graded for exposure of the two faces.

Energy Wall System – (R-21)….

are 3×6 wall timbers, the interior wall surface is covered with R-19.9 rigid insulation. Included are kiln-dried 2×4″ furring at 24″ centerlines applied on the interior timber wall face. The Energy Wall System can be further upgraded with thicker insulation to obtain higher R values.

Double Wall System….

are 2-3×6 timber walls with a Standard R-21 rigid insulation between, ask for details.

Interior Walls.

Some of the interior walls (walls that support overhead beams that span from the exterior timber walls) will be either 4×6 to match the exterior 4×6 walls or 3×6 to match the exterior 3×6 walls. The remaining interior walls are provided as 2×4 or 2×6. Interior finish provided by your builder.

Options and/or Upgrades Available:

  • Typical interior wall finish is assumed as 1/2″ gypsum drywall
  • 1×8 SK tongue & groove cedar
  • Interior walls can be upgraded to solid cedar 3×6 or 4×6
  • 1×6 SK ship lap cedar
  • 1×6 SK tongue & groove cedar to match the wall timbers
  • 1″ or 1/2″ Clear cedar or fir tongue & groove

Tropical Climate….

NOTE: TROPICAL CLIMATE timbers are 3×6 for Tropical Climates, all framing materials are Treated and studs are 2×4 unless change is requested or required.

Two Story & Homes with Lofts:

The upper stories on our 2nd level homes are with Exterior Timber Walls at the first level. The upper levels and lofts are Post&Beam construction with matching 1x Cedar Pattern profiled siding at the exterior surface. On many of the plans you may upgrade the upper level walls to solid cedar timber walls for an additional charge.

 

click to enlage
]]>
https://www.chwi.com/classic-timber-wall-system/feed/ 0
Phoenix D-Log Wall System https://www.chwi.com/phoenix-d-log-wall-system/ https://www.chwi.com/phoenix-d-log-wall-system/#respond Tue, 04 Jul 2023 12:46:31 +0000 https://wiredtogether.ca/chwi/?p=13880

Wall Timbers are laminated 5-LamD-Log “Radius” profile pattern towards the exterior, standard Phoenix Timber profile towards the interior. Solid Cedar Wall timbers are appearance graded for exposure of the two faces

Wall Columns….

Wall Columns are incorporated into the exterior timber walls as building corners (at 90 degrees and various angles) and also spaced in-line for connection of the wall timbers. These glu-laminated columns are machine prepped architectural grade West Coast Douglas Fir. All columns include a precision dado for wall timber connections, are sanded on four sides, labeled, wrapped and ready for on site assembly.

Optional Classic Corners interlocking the corner wall timbers at 90 degrees are available to replace corner columns.

Interior Walls and Interior Wall Finishes….

All interior walls are 2×4 or 2×6 frame as required. Interior finish provided by your Builder.

Options and/or Upgrades Available:

  • Typical interior wall finish is assumed as 1/2″ gypsum drywall.
  • 1×6 SK tongue & groove cedar or whitewood.
  • Interior walls can be upgraded to solid cedar 3×8 or 5×8.
  • 1×6 SK ship lap cedar.
  • 1×8 SK tongue & groove cedar to match the wall timbers.
  • 1″ or 1/2″ Clear cedar or fir tongue & groove.

Tropical Climates….

NOTE: TROPICAL CLIMATES timbers are 3×8 for Tropical Climates, all framing materials are Treated and studs are 2×4 unless change is requested or required.

Two Story & Homes with Lofts:

The upper stories on our 2nd level homes are with Exterior Timber Walls at the first level. The upper levels and lofts are Post&Beam construction with matching 1x Cedar Pattern profiled siding at the exterior surface. On many of the plans you may upgrade the upper level walls to solid cedar timber walls for an additional charge.

click to enlage
]]>
https://www.chwi.com/phoenix-d-log-wall-system/feed/ 0
Phoenix Timber Wall System https://www.chwi.com/phoenix-timber-wall-system/ https://www.chwi.com/phoenix-timber-wall-system/#respond Tue, 04 Jul 2023 12:26:43 +0000 https://wiredtogether.ca/chwi/?p=13867

Wall Timbers are Laminated Kiln-Dried Western Red Cedar, Select Knot (SK) precision milled on four sides to create a tongue & groove connection. The wall timbers are precision end cut to exact length, labeled, wrapped and ready for on-site assembly.

Phoenix Single Timber Wall System….

Wall timbers are laminated 5-Lam (3 1/2″x7″) to meet Energy Code requirements in the United States as well as International construction. Solid Cedar Wall timbers are appearance graded for exposure of the two faces.

Phoenix Energy Wall System….

Wall Timbers are 3 -Lam (2 1/8″x7″) Solid Cedar Wall Timbers of laminated cedar graded for one face exposure.. The interior wall surface is covered with rigid insulation for a R-21 rating.

Included are….

  • Framing is kiln-dried 2×4 Furring at 24″ centerlines applied on the interior timber wall face.
  • Insulation is R-21 Rigid Foam. (Can be further upgraded to obtain higher R values).
  • 1×8 Cedar Pattern Siding on interior of energy wall.
click to enlage
]]>
https://www.chwi.com/phoenix-timber-wall-system/feed/ 0
Post & Beam Wall System https://www.chwi.com/post-beam-building-system/ https://www.chwi.com/post-beam-building-system/#respond Tue, 04 Jul 2023 11:41:00 +0000 https://wiredtogether.ca/chwi/?p=13842

Post&Beam, the simplicity of the name defines the system. Exposed Glu-Laminated West Coast Douglas Fir Posts or concealed 4”x 4” and or 4”x 6” posts are spaced at 4’ to 6’ center lines in walls supporting the load bearing Glu-Laminated Roof or Floor Beams above. Hence; the name Post&Beam. Exposed posts are machine/hand prepped to exceed Architectural Appearance grading standards for West Coast Glu-Laminated Posts & Beams.

Wall Studs & Framing….

Included are kiln-dried 2×6 at 16” centerlines for the exterior walls. For the interior walls, kiln-dried 2×4 at 16” center lines or 2×6 as required. Tropic Regions are 2×4 kiln-dried 2×6 at 16”. All framing member sent to the Tropics are dip treated for insect and decay resistance.

Sheathing….

Included is 1⁄2” CDX plywood that adheres to the highest grading standards for West Coast Mills.

Moisture/Infiltration & Vapor barrier….

Included is Breathable House Wrap at exterior.

Exterior Siding….

Included is Select Knot (SK) Western Red Cedar, Kiln-Dried and selected for grain structure and appearance. The most visible product on your Cedars Homes of Washington cedar home will be the Western Red Cedar Siding. The quality, selection, and processing of this Cedar is of ultimate importance to Cedars Homes of Washington Cedar Homes.

Siding Profiles….

  • Custom Textured 1×6 Shiplap Siding provided in random lengths. The textured (rough) surface is intended as the exposed surface. Standard application is vertical.
  • Cedars Homes of Washington Pattern Tongue & Groove 1×6, or 1×8 is profiled to replicate the Cedars Homes of Washington Timber Walls. The smooth surface is the exposed surface. Standard application is horizontal.

Options and/or Upgrades:

Exterior Sidings….

  • Clear Cedar Shake Siding
  • Clear or Select Knot Bevel Siding
  • Cedar or Pine “D-LOG” Siding
  • “HardiPlank” Cement Fiber Siding
  • Brick
  • Stone
  • Vinyl
  • “DryVit” etc.

Insulation Packages….

Typical with 2×6 construction is R-21 Fiberglass Batt insulation with Poly Vapor Barrier. Double Blanket R-27 or R-34 Insulation System. Rigid foam insulation is added to the exterior. Framing may be required.

Interior Wall Finishes….

  • Interior wall finish 1/2” Gypsum Drywall
  • 1×6 or 1×8 – SK tongue & groove Cedar
  • 1×6 SK ship-lap Cedar
  • 1×6 SK tongue & groove Whitewood
  • 1” or 1⁄2” Clear Cedar or fir tongue & groove.

Note: TROPICAL CLIMATE all framing materials are treated and studs are 2”x 4” unless change is requested or required.

click to enlage
]]>
https://www.chwi.com/post-beam-building-system/feed/ 0
Your Plan or Ours? https://www.chwi.com/your-plan-or-ours/ https://www.chwi.com/your-plan-or-ours/#respond Mon, 19 Jun 2023 13:56:21 +0000 https://wiredtogether.ca/chwi/?p=13761

Whether you choose a stock design from our “Custom Planning Guide,” modify a stock plan or go totally custom, we can design a home that is uniquely your own – and truly beautiful! Free price estimates are given on any modifications you make to our stock designs or for any design you bring to us. Your home will be designed according to the energy code, glazing, seismic and snow load requirements for your area.

Design ideas, building suggestions and experience are part of our dealer service to you. We can help you make your dream home a reality – every step of the way. Our drafting department designs small vacation cabins, large family homes, commercial buildings and multiple unit structures.

We’ve also designed homes to be built in phases – to accommodate the homeowner’s budget. Due to the dimensional stability of our wall system, adding on to an existing cedar home is easy. We’ve done it ourselves as have many of our customers.

Blueprints are free with the purchase price of your home. We do not charge additional blueprint fees for custom designs. On average, our blueprint fees are $3,800 to draw preliminary blueprints and this amount is applied to the purchase price of your home at the time of order. Final blueprints are drawn on a computer aided drafting (CAD) system and contain all relevant information for complete construction of the home. Note: Depending on the design and location of your home, engineering fees may apply. Blueprint fees are non-refundable.

]]>
https://www.chwi.com/your-plan-or-ours/feed/ 0
Women as Project Managers https://www.chwi.com/women-as-project-managers/ https://www.chwi.com/women-as-project-managers/#respond Mon, 19 Jun 2023 13:54:00 +0000 https://wiredtogether.ca/chwi/?p=13755
They Don't Build 'Em Like They Used To - Women Who Project Manage Their Home Construction

It’s well known that project managing the construction of a home will save you money – and give you more decision making control. What is less widely known is that many successful project managers are women – who have no construction experience whatsoever.

My company has been selling cedar homes for over 25 years. Over the years, I’ve had the opportunity to work with all kinds of home buyers. Their backgrounds and experiences are as varied as the houses they build. However, I’ve noticed that the women who elect to project manage the construction of their homes share similar characteristics that uniquely qualify them for the job.

What women lack in home construction knowledge, they more than make up for in natural curiosity and organizational skills – or as some prefer to say, “multi-tasking abilities.” Anita Legaspi and her husband Ray (neither of whom had construction experience) built a 3,600 sf custom cedar home near Lake Stevens, WA about 5 years ago. At the time, Anita was a stay-at-home mom who enjoyed sewing and Ray was employed at Boeing. They realized early on that “they could get more house for their money if they did it themselves.”

Of the pair, Anita had more time available to organize the project and research their options. She realized that her experience with soliciting items for school auctions would also be helpful in obtaining subcontractor bids for their home. “I wasn’t afraid to talk to people and ask questions. I had the ability to communicate on the phone,” commented Anita.

With the help of a timeline (outlining tasks and deadlines), Anita obtained bids and contracted out: the foundation, shell construction, electrical, plumbing, roofing and deck installation. Anita, Ray and their son Christian did much of the painting and finish work themselves.

Anita admits that the time spent building the home was difficult for their family. Ray and Anita chose to live onsite by utilizing their small trailer and a camper. She remembers the initial fun of “camping,” complete with bonfires (to burn up the stumps) and hot dog roasts. However, the summer fun dissipated when wet weather set in. Ray and Anita realized that their trailer was becoming more claustrophobic than cozy – and it wasn’t very well insulated. .

Looking back on their house building days, Anita offers this advice:
1. Decide what’s important to you. If you really want that special kitchen – go for it.
2. You can never go wrong with quality.
3. Develop a cost breakdown sheet to help you compare bids and expenses.
4. Big name companies don’t always offer the support you’ll need. You need to be able to communicate with a dealer, subcontractor, etc. You should feel like you can call them any time.

Nancy and Paul Davis knew that they wanted a cedar home for their mountain retreat near Cle Elum, WA. Neither Paul nor Nancy had bought property before and the whole process of developing the property and building a home was new to them.

In an effort to learn more about the process, Paul and Nancy attended a Log Home Seminar and also researched companies and products on the internet. According to Nancy, “The seminar was good for us. It brought up all the things we hadn’t thought about.”

Prior to staying home with their son Cory, Nancy had been a foundry supervisor and had also worked in a human resources department. She knew a few things about interviewing, hiring and managing people. She also knew that if she and Paul were to build the cabin themselves, “it could take years!” Their solution was to put Nancy at the helm and have her manage the construction of the cabin.

Paul and Nancy elected to undertake the finish work themselves, but hired separate subcontractors to handle the foundation, shell construction, electrical, plumbing and roofing. At one point, Nancy put together a work party with three girlfriends. Together they installed the wood flooring in the great room and kitchen. However, Nancy noted that this was done “only after we had dinner out on Friday night to discuss our approach – and of course, a great breakfast with lots of chit chat before we actually began.”

A low point for Nancy came when she was the only person onsite and “the cabinet people dumped all our kitchen cabinets right in the middle of our driveway.” It was up to Nancy to figure out how to get them all inside by herself. Nancy called for back up and said, “I had to be really assertive, which is totally out of my personality.”

Today, the Davis’ are very proud of their 2,300 sf cabin retreat. “We knew we could do it with the support of knowledgeable people in the industry.” Based on her recently acquired construction management skills, Nancy offers the following tips:

1. Find your own system to stay organized. Nancy used a notebook divided into tasks, i.e. electrical, plumbing, and roofing, etc.
2. Network with other people within the construction community and seek their advice
3. It’s OK to be assertive – especially when you are trying to track down answers and make decisions.

“Everybody is blown away by how beautiful my home is,” says Diane Weibling who project managed the construction of her own 1,200 sf cedar home in North Bend, WA. For ten years, Diane, a family support worker for the Seattle public school system, read “how to build your own home” books at the North Bend library. The librarian finally told her she was going to have to stop reading and start building her own home. And that’s exactly what she did.

In addition to her library research, Diane attended open houses and talked with other homeowners. She says that the idea of project managing the construction her home evolved slowly. “I felt like if I wanted it done right, I’d have to do it myself.”

She obviously did a lot of things right. Her home has a panoramic view of Mt. Si – in the foothills of the Cascade Mountains. People drive slowly past her home so that they can appreciate her unique setting and beautiful home.

Diane took time to look for bargains on cabinets and appliances for her new home. She said, “I got all my solid maple kitchen cabinets for $1,200. Someone had ordered these and never picked them up. I went to the Sears Outlet and checked out their scratch & dent models. I bought a fridge with a broken plastic handle that I easily replaced. I bought a demo wood stove at the fair and saved $600.”

Her project managing experience has taught her a few more things, including:
1. Try not to micromanage the subcontractors. It’ll drive you (and them) crazy.
2. Ask the builder how many projects they have under construction. It may mean they won’t have blocks of time to give to your project – and this could extend your timeline.
3. Ask for contractor prices

Each of these women brought unique skills to their home projects – none of which was a background in construction. What motivated them to manage their home construction? Certainly money was a factor. By project managing the construction of their own homes, each woman realized many thousands of dollars in savings. The savings could result in a lower mortgage payment – or it could mean having a larger home for less money – or both! In some cases, project managing is a way for the homeowner to maintain more control over all aspects of the home’s construction.

Project managing home construction is not an option for everyone. The state of Washington allows homeowners to serve as their own general contractors (or project managers) – but not all states will permit this. Bear in mind also that not all banks will finance owner-built homes. Lastly, remember that when the plumber doesn’t show up on schedule, you’re responsible for keeping the project moving forward and on budget. Some subcontractors are aware that your home is a one-time project for them – whereas a contractor will be calling them for other jobs in the future. This may affect the quality and timeliness of their work which in turn may adversely affect your timeline and budget.

None of the women interviewed for this article had building background and none of them had ever project managed the construction of a home. However, all three women had a natural curiosity about the process and were willing to step out of their comfort zone and try something new. Certainly, the end result for each of these project managers is a beautiful home and many thousands of dollars saved. The most unexpected outcome has been a change within each woman. When asked, “What did you learn about yourself” all three women project managers responded, “I learned I can do anything I set my mind to.”

]]>
https://www.chwi.com/women-as-project-managers/feed/ 0
When Should You Start Your Blueprints? https://www.chwi.com/when-should-you-start-your-blueprints/ https://www.chwi.com/when-should-you-start-your-blueprints/#respond Mon, 19 Jun 2023 13:45:44 +0000 https://wiredtogether.ca/chwi/?p=13741
It's never too early...

NOW is the time to begin the blueprint process.

1. Beat the rush – Building permits take longer to process during the peak building season.

2. Lock in prices – The cost for building materials and labor to construct homes is very competitive in the current economy. Contractors and subs require blueprints to issue accurate construction bids.

3. Obtain financing – Lenders require final blueprints and an approved building permit to close a loan. Interest rates are still good, but no one can predict how long they will last.Cedar Log Home

4. Reserve the best builder and subs – Contractors and subcontractors are lining up work for the next building season.

5. Get faster bid response – Contractors and subcontractors have more time to prepare bids during the off season.

6. Avoid costly on-site changes – Start blueprints now and and allow ample time to review the plans (and make changes) before construction starts.

Let us help you develop a house plan that fits both your lifestyle and your budget. Call for a free consultation today: (360) 480-9537

]]>
https://www.chwi.com/when-should-you-start-your-blueprints/feed/ 0
Wall System Options https://www.chwi.com/wall-system-options/ https://www.chwi.com/wall-system-options/#respond Mon, 19 Jun 2023 13:38:35 +0000 https://wiredtogether.ca/chwi/?p=13734

Cedar Homes of Washington Inc. offers our homeowners a wide selection of R-21 wall system options including:

Note: We  offer the original Pan Abode “Classic” timber wall building system for homeowners who want to add onto their existing older Pan Abode home.  

Any of our stock cedar home designs can be easily modified and custom ventures are our specialty. We’d be happy to give you a free price estimate whichever direction you decide to go.

6x8 Laminated Cedar D-Log

5x8 Laminated Cedar Timbers

]]>
https://www.chwi.com/wall-system-options/feed/ 0
Plan Your Pre-Construction Timeline https://www.chwi.com/plan-your-pre-construction-timeline/ https://www.chwi.com/plan-your-pre-construction-timeline/#respond Mon, 19 Jun 2023 13:26:41 +0000 https://wiredtogether.ca/chwi/?p=13725
Preparation For Building:

Note: This timeline represents only a suggested path. Each homeowner may approach their project differently and have special building or land development considerations. Cedar Homes of Washington will assist the homeowner to organize their own building project and timeline.

]]>
https://www.chwi.com/plan-your-pre-construction-timeline/feed/ 0
Lake Wenatchee Horizon View https://www.chwi.com/lake-wenatchee-horizon-view/ https://www.chwi.com/lake-wenatchee-horizon-view/#respond Fri, 16 Jun 2023 13:10:43 +0000 https://wiredtogether.ca/chwi/?p=13713

The house on a hill… This Custom Horizon View was built near Lake Wenatchee, Washington. As you can tell this lot was on a very steep hillside, for that reason we decided that a daylighted basement was the perfect thing for this location. The basement of this structure was stick framed, with traditional 2X6 material, CDX Plywood, then finished with cedar siding to match the upper floor. The Upper floor exterior walls were framed with our 5-Lam Phoenix Energy wall. The large beams over the front-center wall are to accommodate for the heavy snow load on this specific site. Windows and doors were purchased separately on this home package.

]]>
https://www.chwi.com/lake-wenatchee-horizon-view/feed/ 0